Skip to Main Content

Bodine Electric Type WX Gearmotors Now Have Higher Torque Ratings

Bodine Electric Type WX Gearmotors Now Have Higher Torque Ratings

Bodine Electric Company recently upgraded the design of many of our type WX gearmotors to increase the output torque ratings while maintaining the same long-life rating. Two parts in the gearhead design were changed to accomplish the higher torque ratings: the rotor/armature shaft and the first stage gear. The rotor is the name for the

VIEW

Video: How to Connect a PMDC Gearmotor to a Filtered PWM DC Speed Control

Video: How to Connect a PMDC Gearmotor to a Filtered PWM DC Speed Control

In this new How-To video, we are demonstrating how to connect a 130VDC, two-wire PMDC gearmotor to a Bodine WPM PMDC motor speed control powered from a 115VAC/60Hz/1-phase line. In this example, we used a Bodine stock model 6071, type 33A-HG/H, 130VDC hollow shaft gearmotor, powered by a 0-130VDC (out), type WPM Speed control item

VIEW

How To Connect a Reversing Switch to a 3- or 4-Wire (PSC) Gearmotor

How To Connect a Reversing Switch to a 3- or 4-Wire (PSC) Gearmotor

Below information is from our latest Application Note on how to connect and reverse our fixed-speed, 3-wire and 4-wire reversible, AC single-phase gearmotors and motors. We conclude our series of AC application notes with four examples of what types of reversing switches an engineer or technician can use to reverse our stock gearmotors. How to Wire an Optional Reversing Switch to a 3- or 4-wire

VIEW

Bodine Launches Competitor Cross-Reference Tool for Baldor, Bison, or Leeson Gearmotor Replacements

Bodine Launches Competitor Cross-Reference Tool for Baldor, Bison, or Leeson Gearmotor Replacements

If you are looking to cross a Baldor, Bison, or Leeson gearmotor you can now do so on our customer Support web page. Each competitor part number is constructed differently: For example, if you are crossing a Baldor item, the part number will look something like this GCP24004, please do not add any additional spaces,

VIEW

How to Connect a Run Capacitor to a AC 4-Wire-Reversible PSC Gearmotor or Motor

How to Connect a Run Capacitor to a AC 4-Wire-Reversible PSC Gearmotor or Motor

In this How-To video, we show you how to wire and connect one of our AC single-phase, 4-wire-reversible, permanent split capacitor (fixed speed) gearmotors with its run capacitor and a power cord. PSC gearmotors or motors require a run capacitor to be connected to the winding at all times. To enclose the capacitor or to

VIEW

Typical Operating Conditions for AC Gearmotors and Motors

Typical Operating Conditions for AC Gearmotors and Motors

Read our latest Tech Note on Typical Operating Conditions for AC Gearmotors and Motors! With this new Tech Note from our engineering team, you’ll learn how operating a gearmotor or motor above or below the ratings shown on its product nameplate can affect performance. For standard gearmotors, the torque rating shown on the product nameplate

VIEW

Introduction to Motor Constants for Fractional Horsepower Gearmotors

Introduction to Motor Constants for Fractional Horsepower Gearmotors

Motor constants are needed to calculate permanent magnet DC (PMDC) or brushless DC (BLDC or EC) motor specifications and ratings, or to match the motor properly to an amplifier. The motor constants are required in order to predict the PMDC or BLDC motor’s performance with changing variables, such as different input voltages or different loads. (See below PDF

VIEW

Brush Replacement for a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor

Brush Replacement for a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor

Watch this video to learn how to inspect and replace the carbon brushes and brush springs in a Bodine type 24A permanent magnet DC (PMDC) stock gearmotor or motor. To watch, click here. To download these instructions as a PDF, please visit our Literature page: https://www.bodine-electric.com/literature/brush-maintenance/ Copyright Bodine Electric Company © 07/2021. All rights reserved.

VIEW

New Fan Shrouds for Bodine type 34R, 42R, and 48R - TEFC AC Gearmotors and Motors

New Fan Shrouds for Bodine type 34R, 42R, and 48R – TEFC AC Gearmotors and Motors

Starting this fall, we are rolling out new fan shrouds for our standard type 34R, 42R and 48R AC induction gearmotors and motors (48Rs, likely early 2022). The new, metal fan shrouds are several times stronger than the old metal designs and will provide superior protection to the fan end of the AC gearmotors and

VIEW

Molecular Distillation Equipment for the Cannabis Industry

Molecular Distillation Equipment for the Cannabis Industry

A manufacturer of CBD distillation equipment required a gearmotor to precisely control the flow and speed of liquid material through their new distillation apparatus. Working with an authorized Bodine distributor and our sales team, the manufacturer selected several of our variable speed AC inverter duty gearmotors, combined with inverter drives (VFDs) and a PLC control

VIEW

Need help getting started?

We can help you find the best motor, gearmotor, or control for your next design project. Contact us today!